New! Easier to Sanitize Design ,This innovative design was the result of customer feedback about the difficulty of santizing our traditional barbed stone when tubing was attached. We added threads instead of a barb and now you can use the fittings you see at the bottom of this page to connect and disconnect your tubing. This allows you to place the stone by itself directly in a pot of boiling water to sanitize. Easy.,,316 Stainless,1/2" diameter. Stone is 1" in length. Overall length is 1 7/8",,To Sanitize,To properly sanitize your stones, we recommend you run it in a sanitized solution for 5 minutes. If the stone becomes clogged we recommend boiling the stone for 1-3 minutes to help break down anything within it.,,Important Notes,You do not want to touch the stainless stone portion with your hands. The oils on your fingers can actually clog the small pores in the stone.,,The stone does not come with the barb fitting or flare nut - those will have to be purchased on their own. See the Related Items below.,,The 2 Micron size is more commonly used for aeration or oxygenation pre fermentation, but can be used to carbonate beer. If you wish to use an aquarium style Aeration Pump to pump air through this stone we recommend a "deep water" type for aquariums, as these will have the necessary PSI to force the air through the stone and into the wort. If you are looking for a ready to use package check out Complete Aeration System. Thank You!