Conical Fermenters

Use conical fermentors for Primary Fermentation and Secondary Fermentation. Browse our conical fermentors and choose from a Large Variety of Conical Fermentors including Stainless Steel Conical Fermentors.

Showing 21 products

14 Gallon Fast Ferment Conical Fermenter

14 Gallon / 53L Capacity Conical Fast Fermenter

Six inch removable threaded top for easy cleaning

Solid steel stand with assembly screws

1.5 in bottom valve

Thermowell for optional temperature monitoring

MB_FE920
$179.99

3 Gallon Fast Ferment Conical Fermenter

Perform primary and secondary fermentation in the same vessel.

A small FastFerment Fermenter, perfect for 1 or 2 gallon batches of wine or beer.

Allows you to rack directly into your bottles or keg, from the fermenter.

Wide lid allows for easy cleanup.

Collection jar provides easy and sanitary yeast harvesting

GF_GF934
$59.99

FastFerment Plastic Conical Fermenter - 7.9 Gallons


Conical Fermenters are a great addition for your brewery, because they allow you to do both your primary and secondary fermentations in the same vessel. The problem is that conicals can sometimes cost hundreds if not thousands of dollars. Enter the FastFerment! The "cone" shape design of the fermenter allows yeast and sediment to collect in the bottom of the fermenter. When fermentation is done, simply close the bottom valve and remove the collection ball from the vessel and voila – you have started secondary fermentation! Now you can clean the collection ball and put it back on the FastFerment to finish off your secondary, or you can store it with the yeast in the fridge to use again. Easy as pie.

Kit Contents:
One 7.9 US Gallon / 30 Litre Conical Fermenter
6" Screw Top, Grommet & Airlock
Bottom Collection Ball For Harvesting Yeast
1" Union Teflon Valve and fittings
Wall Mounts (2), Mounting Bolts & Anchors (4)
1/2" PVC Hose (4') & Hose Clamp
Permanent Thermowell for Temperature Monitoring
Instructions

The FastFerment comes with all you see in the list above, along with wall mounting hardware so you can store your FastFerment in an elevated position on your wall. See a list of accessories you can buy for the FastFerment below, which includes a floor stand.

Heights:
On wall mounts from bottom of collection ball = 35.5 in. to top of airlock
In the optional stand = 37 in. to top of airlock

Widths:
With wall mounting bolts = 14.75 in.
Without wall mounting bolts = 14.25 in.

GF_5175
$99.99

MiniBrew Conical Fermenter 6.5

The Affordable Conical Fermenter by minibrew is designed for five gallon recipes.

It holds a full 6.5 Gallons.

Included with the fermenter is a 3/4 inch nickel plated bottom ball valve, stand, lid, air lock, and 1/2 inch nickel plated racking port valve.

Also included is a 3/4 inch and 1/2 inch nipple for fastening the valves to the fermenter.

The Model 6.5 conical fermenter does not have thermometer mounting thread.

f6.5
$249.99

MiniBrew Conical Fermenter 8

This conical fermenter is our best design for five gallon recipes brewers.

When you open the box our fermenter is ready to go just clean and sterilize.

Included are a 1 inch nickel plated bottom ball valve, 1/2 inch racking port nickel plated ball valve, a lid and stand.

The lid has two 1/2 inch threads with screw in plugs.

There is also a screw in plug for a thermometer thread just below the label.

f8b
$259.00

MiniBrew Conical Fermenter 15

The conical fermenter ships ready to brew and is our best design for 10 gallon recipes.

Included are a 1 inch nickel plated bottom ball valve, 1/2 inch nickel plated racking port ball valve, lid, stand plus three 1/2 inch screw in plugs.

There are two threads in the lid and one below the label for a thermometer.

The thermometer is not included.

The plastic is a full 5/16 inches thick.

f15b
$319.99

MiniBrew Conical Fermenter 40

Ships ready to brew.

Includes 1 inch nickel plated bottom ball valve, 1/2 inch racking port nickel plated ball valve, lid, stand and three screw in plugs for 1/2 inch threads in lid and the thermometer thread below the label.

Plastic is full 5/16 inch thick.

Lead time for the mold is about two to three weeks. Ships in 2 oversize boxes.

The f40 ships via truck only.

f40
$775.00

Showing 22 - 42 of 51 results